Heat Shrinkable Tubing

HUB Electronics stock and distribute a vast range of quality heat shrinkable tubing for cable harnessing, general electronics, Automotive, Rail, Military, Aerospace applications.

The range covers heat shrinkable tubing in Thin, Medium and thick wall material, adhesive or non-adhesive lined in Black, Clear, Green/Black and single coloured.

Please use the Tubing selector guide or the product selector panels to assist in product selection, as well as PDF product data, or contact our Sales team for assistance using the link provided.

Helashrink HMT200A

The hot melt tape flows when heated and provides permanent air and water tight seals.

Helashrink HMT200A HellermannTyton

HellermannTyton EPS300/EPS400

EPS is a flexible and thin walled heat shrink tubing with a co-extruded hot melt adhesive inner wall. The adhesive flows easily to provide an environmental sealing of complex parts and protects against moisture.

HellermannTyton EPS300/EPS400 HellermannTyton

HellermannTyton HFT-A - Self Extinguishing

This flexible heat shrink tubing has many excellent properties including fast shrinking, easy handling, good mechanical strength and resistance against chemicals and solvents. It is UL and CSA approved, easy to print on and available in a wide range of colours and internal diameters up to 4 inches (101.6mm).

HellermannTyton HFT-A - Self Extinguishing HellermannTyton

HellermannTyton MA47/MU47

MA47 has been designed to protect cable joints and terminations in low voltage applications. The adhesive lining makes it especially suitable for above and underground cable applications. This medium wall tubing is flexible yet has robust insulation characteristics. MA47 tubing is coated with a thermoplastic adhesive on the inside, which protects against humidity and other kinds of environmental impacts after shrinking.

HellermannTyton MA47/MU47 HellermannTyton

HellermannTyton PST-H

PST-H is a flexible, high performance elastomeric tubing. This tubing is used in aerospace, defence, railway and automotive applications. PST-H is resistant to diesel, aviation and hydraulic fluids. It provides a reliable protection against abrasion and mechanical damage and is suitable for protecting cables and wire harnesses.

HellermannTyton PST-H HellermannTyton

HellermannTyton PST-HT

The benefit of the thin walled and very flexible PST-HT tubing is in its lighter weight. It is used in areas where weight is a key factor, for example in aerospace applications or motorsport.

HellermannTyton PST-HT HellermannTyton

HellermannTyton TA32/TA42

TA32 and TA42 are thin walled adhesive lined heat shrink tubings. Both TA32 and TA42 have an outer wall that is highly flame retardant and are UL224 approved. They have high shrink ratios making them ideal for variable substrates. The adhesive lining ensures that a good environmental seal can be maintained.

HellermannTyton TA32/TA42 HellermannTyton

HellermannTyton TF21

Quick and easy shrinking TF21 tubing is widely used for insulating, mechanical protection, strain relief, marking, and bundling. The excellent balance of electrical, mechanical and chemical properties meet and exceed industrial standards. TF21 is UL-224 listed and available in a wide range of sizes and colours.

HellermannTyton TF21 HellermannTyton

HellermannTyton TF24

TF24 transparent tubing is ideal to protect wire and cable markers. The transparency allows for the inspectability of the substrate covered. TF24 is halogen free.

HellermannTyton TF24 HellermannTyton

HellermannTyton TF34

This flexible, halogen free tubing provides good insulation, while the clear colour allows excellent visiblity of the substrate below. For general purpose applications, bundling and jacketing of cables where visual inspection is required.

HellermannTyton TF34 HellermannTyton

HellermannTyton TFE2/TFE4

TFE heat shrink tubing is specified predominantly because of its very high temperature resistance. It is an extra thin walled transparent tubing that has both high abrasion resistance and good resistance against aggressive chemicals. TFE is available in either 2:1 (TFE2) or 4:1 (TFE4) shrink ratios.

HellermannTyton TFE2/TFE4 HellermannTyton

TREDUX HA47 Thick Wall

TREDUX HA47 is a thick walled polyolefin adhesive lined tubing for low and medium voltage power applications. The toughness and the weatherability of TREDUX thick wall tubing makes it suitable for exposed applications and underground cable joints.

TREDUX HA47 Thick Wall HellermannTyton

TREDUX MA47 Medium Wall

TREDUX MA47 medium wall heat shrink tubing with a shrink ratio of 4:1 is resistant to solvents, acids and alkaline solutions and offers especially good mechanical strength. The thermoplastic adhesive liner provides good moisture sealing and weathering protection.

TREDUX MA47 Medium Wall HellermannTyton

TREDUX Thin Wall

TREDUX is a thin wall, flexible tubing with a shrink ratio of 3:1 and is made from crosslinked polyolefin. Available in 1 m lengths, 9 sizes from 1.5 mm to 101.6 mm and colours black and yellow/green.

TREDUX Thin Wall HellermannTyton


Viton®-E is a fluoroelastomeric heat shrink tubing. It remains flexible even at very low temperatures. It has extremely high resistance to chemicals and maintains its excellent mechanical strength and flexibility even after long term exposure to high temperatures. Viton-E tubing is approved to VG 95343/5E.

Viton®-E HellermannTyton

Worldwide stockists and distributors of electro-mechanical products and services from the leading manufacturers...

Amphenol APEM Astro Tool Corp Compaero Connectix Deutsch DMC E-T-A Glenair Harting HellermannTyton HUB Electronics ITT Lapp Group LEMO Lindy MARL Neutrik ODU Polamco Radiall Souriau Telegärtner TTAB Connectors Wago