Telegärtner

Sorry, there are currently no products available to view.

Telegärtner BNC Series Coaxial Connectors

Telegärtner BNC Series Coaxial Connectors available from HUB Electronics.

Telegärtner BNC Series Coaxial Connectors Telegärtner

Telegärtner MCX Series Coaxial Connectors

MCX series connectors utilize a snap coupling and is suitable for use up to 6 GHz. The impedance is controlled at 50 ohms. Connector designs are available for flexible, conformable and semi-rigid cables. Styles are available for mounting to printed circuit boards using thru-hole soldering, press-fit and surface mount technology (SMD). Solder and crimp techniques are used to terminate this series to cables. Typical applications include small instruments and communication equipment.

Telegärtner MCX Series Coaxial Connectors Telegärtner

Telegärtner MMCX Series Coaxial Connectors

MMCX series micro-miniature connectors are a smaller version of the MCX and utilize a snap coupling. They are suitable for use up to 6 GHz. The impedance is controlled at 50 ohms. Connector designs are available for flexible, conformable and semi-rigid cables. Styles are available for mounting to printed circuit boards using thru-hole soldering, press-fit surface mount technology (SMT). Solder and crimp techniques are used to terminate this series to cables. Typical applications include portable instruments and personal communication equipment.

Telegärtner MMCX Series Coaxial Connectors Telegärtner

Telegärtner N Series Coaxial Connectors

Telegärtner N type weatherproof screw coupling RF connector series.

This series, subject to application, can be used up to 11 GHz. They are 50 ohms impedance. Connector styles are available for flexible, conformable, semi-rigid and corrugated cable types. Both crimp and clamp cable termination processes are used for this series. Special design characteristics have resulted in excellent levels of performance with regard to return loss (VSWR) and intermodulation distortion.

Applications for these connectors vary from signal and data transmission where vibration resistance and environmental protection is a requirement. N series provides a medium-power high-frequency solution for coax connections. Mating face sealing for N connectors between plug and jack (mated) according to IP 68. The classifications are general statements for the relevant series. Individual connectors may deviate from the values shown.

Telegärtner N Series Coaxial Connectors Telegärtner

Telegärtner SMA Series Coaxial Connectors

SMA series has a threaded coupling, and can be used to frequencies of over 18 GHz (depending on type). The impedance is controlled at 50 ohms. Connector styles are available for flexible, conformable and semi-rigid cable types. Versions of the SMA connector are available for mounting to printed circuit boards using both through-hole soldered and through-hole press-fit techniques, as well as surface mount types (SMD). Solder, crimp and clamp techniques are used to terminate this series to cables. SMA typical applications include test equipment, space and communication systems.

Mating face sealing for SMA connectors between plug and jack (mated) according to IP 68. This classification is a general statement for the relevant series. Individual connectors may deviate from the values shown. If in doubt, please consult our engineers.

Telegärtner SMA Series Coaxial Connectors Telegärtner

Telegärtner TNC Series Coaxial Connectors

TNC series are commonly used coax connectors, similar to the BNC, but with a screw coupling, this connector can be used up to 11 GHz. Both 50 ohms and 75 ohms impedances are available. Connector styles are available for flexible, conformable and semi-rigid cable types. TNC connectors are available for mounting to printed circuit boards using both through-hole soldered and through-hole press-fit techniques. Both crimp and clamp cable termination processes are used for this series. Applications for these connectors range from signal and data to video transmission where vibration resistance is required.

The TNC series are a low-cost high-frequency solution. Mating face sealing for TNC connectors between plug and jack (mated) according to IP 68. The classifications are general statements for the relevant series. Individual connectors may deviate from the values shown. If in doubt, please consult our engineers

Telegärtner TNC Series Coaxial Connectors Telegärtner

Telegärtner RJ45 MFP8 Connectors

  • Cat .6a / RJ45
  • 360 degree shielding
  • 90 degree option
  • Die cast housing
  • Cable range from 5.5 – 10 mm
  • Quick termination
  • Stock available now
Telegärtner RJ45 MFP8 Connectors Telegärtner

Worldwide stockists and distributors of electro-mechanical products and services from the leading manufacturers...

Amphenol APEM Astro Tool Corp Connectix Deutsch DMC E-T-A Glenair Harting HellermannTyton HUB Electronics ITT Lapp Group LEMO Lindy MARL Neutrik ODU Polamco Radiall Souriau Telegärtner TTAB Connectors Wago